10 Easy and Perfect Step For Installing Artificial Grass

Artificial grass has become the favorite option for houses, companies, and event places looking for an attractive lawn with minimal maintenance. Artificial grass is a great option to beautify your backyard or business location with beauty and functionality. Green Touch UAE has advanced in supplying good quality artificial grass that makes any space a lush, green haven. Here is a full guide on installing fake grass for professional-looking results.

Step 1: Plan and Measure the Area

Plan the following before any installation procedure begins:

Measure the Area: Decide exactly how much space you will occupy with fake grass. This helps establish how much turf you'll need.

Grass Type: The UAE offers a selection of grass types. It ranges from realistic ones to more decadent designs. Choose what best fits your needs.

Underground Utilities Check: Look for any pipes, wires, or irrigation systems to avoid damaging them.

Step 2: Clean and Prepare the Ground

The ground must be prepared to get a smooth, even surface.

Remove existing grass: Using a shovel, remove all the natural grass, weeds, or plants.

Dig: Dig down 2-3 inches below to allow space for the foundation layer.

Level the Ground: Fill in the low places or eliminate irregularities so that the surface will be even.

Step 3: Apply a Weed Barrier

You want to prevent weeds from popping up through the fake grass. To do that, apply a weed barrier.

Smother with cloth: Apply a weed barrier cloth to the entire area. Overlap the cloth edges to ensure full coverage.

Secure the fabric: Anchor in place and inhibit movement from shifting when installing the weed barrier using landscaping staples.

Step 4: Establish a Firm Foundation

A firm foundation guarantees a lifetime and will help improve drainage for the grass.

Add Crushed Stone Layer: Cover the surface area using crushed stone or gravel. Increase drainage and provide a hard base.

Compacting the bottom: Compact the gravel using a plate compactor, or hand tamper it into place. Smoothen it out and harden the top.

Levelling and smoothing out: Use raking all over the compacted layer to remove imperfections.

Green Touch UAE recommends a 12-inch base so that the lawn is firm and drains.

Step 5: Install the Artificial Grass

After the base installation, it's time for the fake grass installation:

Unroll the grass: Roll the grass over the prepared space so that the blades point in the right direction.

Let It Sit: Let the grass sit there for a few hours for it to relax and flatten.

Edge your Grass: Use a utility knife to edge the cuts so that you get a sharp fit around borders, trees, or other obstructions.

Step 6: Join the Seams (If Applicable)

For large installations, you will be gluing many rolls of turf together:

Lay out the Grass Rolls: Tuck each roll tightly next to the other so the edges do not overlap.

Add Seam Tape: Place seam tape under the edges of the turf where the pieces join.

Add Adhesive: Apply glue on the seam tape, then press the grass edges to the tape. This will give a smooth appearance.

Allow the glue to dry for some hours before proceeding to the next step.

Step 7: Staking Down the Grass

Staking the artificial grass prevents it from shifting over time.

Use Landscaping Staples: Place staples around the perimeter every 6-8 inches and in the middle every 12 inches to secure the lawn.

Hammer Down the Staples: Make sure the staples are flush with the top of the grass and must not be seen.

This will give a strong foundation, even in high-traffic areas.

Step 8: Add Infill to the Grass

Adding infill allows the blades of grass to stand upright and gives an extremely soft, natural feeling.

Select the Right Infill: Green Touch. UAE provides several infills like sand and rubber. Each of these has varying degrees of hardness, softness, and temperature.

Spread the Infill: Using a drop spreader, apply a layer of infill to the field.

Brush the Grass: Allow the infill to settle, and then lift the blades to their natural, upright position using a stiff broom.

Step 9: Final Touches and Inspection

Your artificial grass is almost complete! Here's how to finish:

Brush and Fluff the Grass: Give the grass one final brush to lift the fibers and create a lush appearance.

Inspect the Installation: Look for loose places, uneven locations, and exposed staples, and make any adjustments necessary.

Step 10: Maintenance Tips

Artificial grass is low-maintenance, but a few simple procedures may keep it looking its best:

Remove Debris: Clean leaves and dirt with a leaf blower or rake.
Water the grass to remove dust every few weeks to maintain its color.

Brush the Blades: Frequently brush the blades to ensure they stand upright, especially in areas that are frequently passed through.

Why Choose Green Touch UAE for Artificial Grass Installation?

Green Touch UAE takes pleasure in offering you the highest quality artificial grass, which is strong yet beautiful. The grass is particularly designed to suit the environment of the UAE to stay lush green throughout the year. With our experience, supplies, and assistance, you may have a smooth hassle-free installation that changes your area.

Final Thoughts

No maintenance improvement of any space with fake grass. Follow the procedures to have a beautiful, long-lasting lawn that feels and looks natural. Whether it's in your backyard, business property, or rooftop garden, Green Touch UAE can handle the job for you.

This guide is highly adaptive to personal measurements or individual project requirements. However, if further assistance is necessary or the services of professionals for installing, contact Green Touch UAE. The capable workers who work there are here at your beck and call during every stage of completion.